Scottoiler Bicycle Oiler

(Active Fluid System)

After years of extensive research and testing, we are very proud to launch the Scottoiler Cycle Oiler (Active Fluid System) for all bicycles! No matter whether your bike is on or off-road get the best from your chain with the Scottoiler Cycle Oiler.

The Scottoiler Cycle Oiler dramatically improves the service-life, efficiency and cleanliness of bicycle transmission. Gone are the days of labour intensive and dirty methods of cleaning and lubricating your chain. The Scottoiler Cycle Oiler does it for you – simply, without mess, without fuss – and whilst you ride your bike!

Our lightweight lubricating system:
 

	Increases chain life Increases efficiency Protects your chain from corrosion Reduces wear Keeps your chain looking brand new

How does it work?

Lubricates: By squeezing the "Squid" pump, a high strength film of Active Fluid is dispersed in the chain bearings. Once the water element of the Active Fluid evaporates, a very thin, almost invisible, protective layer of concentrated Active Fluid remains in place which protects the chain from corrosion when the bike is stored

Cleans: Any 'grinding-paste deposits' formed by a mixture of oil and dirt can be easily washed away by ordinary water. Black deposits on the hands, legs or clothing can also be easily washed away simply with cold tap water. more>>

What's in a kit? (total weight is 2 ounces):
 

A 35ml fluid reservoir for our specially formulated Active Fluid A fluid dispensing jockey wheel which replaces the lower jockey-wheel on your bike A unique and innovative "Squid" rubber finger pump Delivery tubes 125ml bottle of Active Fluid 30ml bottle of Cleaning Fluid

Buy Scottoiler Cycle Oiler System?

Buy Active Fluid?

Easy to fit?
Simply attach the reservoir to a frame tube and the fluid dispensing jockey wheel to the rear derailleur, attach the Squid pump to a frame tube and connect all of these with the delivery tubes. Fill the reservoir, squeeze the Squid – and that's all!

Please Note:

The Scottoiler Cycle Oiler is not compatible with some SRAM rear derailleurs, see the Jockey Wheel Compatibility Guide for more information. 
It is not possible to remove and replace the jockey wheel on the SRAM 3.0 as the original is riveted, not bolted, in place.
For bikes with oversize jockey wheels - i.e. with 13 or 15 tooth Tension (lower) Jockey Wheels, please contact us.

Lubrication and corrosion protection where you need it, when you need it.

Download Fitting Instructions for your bike (PDF 64 Kb)

Download Cycle Oiler Leaflet for your bike (PDF 255 Kb)

For further information, please email or telephone us on 0141 955 1100