What’s in the eSystem box?
The eSystem motorcycle chain lubrication accessory comprises a Reservoir Electronic Pump (REP), display screen, an injector (which feeds the oil onto the chain and sprocket) a bottle of Scottoil suitable for approximately 5,000 miles and various parts required for the different fitting options.
How does the eSystem motorbike chain oiler from Scottoiler work?
This motorbike chain oiler system is an electronically pumped system, so the oil is forced from the reservoir to the chain by the REP. Check out the animation or visit the technical section to find out more about how the system works.
How far can I go before I have to refill the reservoir?
The range on this kit is up to 1800 miles (depending on flow rate, speed, etc.) between reservoir refills – it will tell you when it is running low so you can top up.
How much power does the motorcycle chain lubrication system need?
When the engine is off, the eSystem draws less than 1 milli-amp of power. This is significantly less than the current drawn by a modern alarm so you don’t need to worry about the power drain on the battery.
What oil does the Scottoiler eSystem take?
All Scottoiler motorbike chain oiler kits use our very own oil specially developed for use with a motorcycle chain lubricator system. Our oil works better because it has a low tack additive to ensure dirt doesn’t stick. This gets the oil to work on lubricating and protecting from corrosion.