Vacuum Tubing

The vacuum tubing is used for connecting the Scottoiler reservoir to the engine vacuum and is made of high quality fuel resistant material for safety.

Vacuum tubing can be easily cut to the required length for your vacuum connection with a sharp knife and it can also be cut into smaller sections to make replacement injector nibs. To find out how check out our guide here:

Using your vacuum tubing to make replacement dispenser tubes:

It is possible to make replacement dispenser tubes using left over tubing, remember to slash cut the tube and mushroom the opposite end as described above for a secure, air-tight seal.

Hint: If you are repeatedly losing tubes, review the tube position and rotate the rear wheel slowly by hand, ensuring the sprocket bolts, teeth, lightening holes and the chain do not foul the tube.