Scottoiler eSystem - Motorcycle Chain Oiler

L’eSystem è il nostro pluripremiato sistema di lubrificazione per catene di motocicli e il modello di punta di Scottoiler. Votato come prodotto dell’anno MCN, le sue fantastiche caratteristiche tecniche, la facilità di installazione e le prestazioni su strada
contribuiscono a creare lo strumento di manutenzione della catena motociclistica più avanzato che abbiamo mai sviluppato.

Come funziona

L’eSystem è un oliatore per catena di motociclette pompato elettronicamente che richiede solo una piccola alimentazione dalla batteria per funzionare. Può essere installato sulla maggior parte delle bici in meno di un’ora collegando il cablaggio alla batteria; questa connettività plug and play significa che l’eSystem è l’oliatore per catene di motociclette elettronico più semplice mai sviluppato. A differenza di altri prodotti, non ci sono cablaggi complicati o collegamenti a tachimetri o interruttori.

L’eSystem è progettato per offrire al ciclista la massima flessibilità e possibilità di regolazione della portata e consente semplici modifiche con un solo tocco per regolare la portata in base alle condizioni. Pertanto l’eSystem mette il pilota in controllo e fornisce mezzi semplici e intuitivi per regolare dinamicamente la velocità in base alle proprie esigenze.

L’eSystem rileva vibrazioni e movimento con un accelerometro a tre assi, utilizzando la tecnologia derivata dalla MotoGP. Rileverà quando il motore è in funzione e si accende, quindi una volta in movimento, anche a velocità di crociera costanti in autostrada, il sensore monitorerà le vibrazioni del motore e attiverà la modalità di lubrificazione dell’eSystem. Il sistema visualizza queste informazioni sullo schermo insieme alla portata, alla temperatura in gradi Celsius e al livello dell’olio insieme alla lettura dell’accelerometro in “G”.

6

Panoramica

  • Electronic Motorcycle Chain Oiler
  • Extends the life of your chain and sprockets
  • Takes over the entire chain maintenance regime
  • Quick and easy to install
  • Full control through handlebar display
  • Saves you time, money and hassle
Scottoiler eSystem Contents

Cosa c’è nella scatola?

The main components of the kit are the eSystem Reservoir (REP), the dispenser (which feeds oil onto the chain and sprocket from the chain oiler), a bottle of Scottoiler motorbike chain lube suitable for approximately 5,000 miles and the parts required for a variety of fitting options.

Some motorcycle models may require special parts which are available free of charge from Scottoiler. Please refer to the bike specific install guides where these parts are highlighted.

Frequently Asked Questions

How does the eSystem motorbike chain oiler from Scottoiler work?

This motorbike chain oiler system is an electronically pumped system, so the oil is forced from the reservoir to the chain by the REP.  Check out the technical section to find out more about how the system works.

How far can I go before I have to refill the reservoir?

The range on this kit is up to 1500 miles (depending on flow rate, speed, etc.) between reservoir refills – it will tell you when it is running low so you can top up.

How much power does the eSystem need?

When the engine is off, the eSystem draws less than 1 milli-amp of power.  This is significantly less than the current drawn by a modern alarm so you don’t need to worry about the power drain on the battery.

What oil does the Scottoiler eSystem take?

All Scottoiler motorbike chain oiler kits use our very own oil specially developed for use with a motorcycle chain lubricator system.  Our oil works better because it has a low tack additive to ensure dirt doesn’t stick. This gets the oil to work on lubricating and protecting from corrosion.